Kiosk Assembly

Watch the quick video below to learn how to assemble the Mashgin kiosk!

Required Tools

• Box Cutter
• Small Philips Screwdriver
• 10mm Socket
• 1/4" Ratchet

🚨 Note: Power tools are prohibited because they can damage the kiosk.

 

Package Contents

• Tower
• Base Plate
• Hood
• Left Arm
• Right Arm
• Accessory Bag

 

Assembly Instructions

1. Place Tower Face Down
   • the ports and back plate facing up
     
     
2. Attach Base Plate to Tower
   • use seven 10mm bolts
     
     
3. Lift Kiosk into Upright Position
   
   
4. Remove Back Plate
   • remember to remove the warning label and internal foam
     
     
5. Attach Hood to Tower
   • use two 10mm bolts and four 10mm nuts
     
     
6. Attach Hood Camera Cover
   • remove all plastic protective films
     
     
7. Remove Magnetic Arm Plates
   
   
8. Attach Arms to Tower
   • use four 10mm bolts, two on each side
   • plug in the cam USB cables on both sides
     
     
9. Connect Internal Cabling
   • use the kiosk version number to locate the correct cabling guide
     • open the appropriate internal cabling guide within Setting Up Your Kiosk (Step 2)
   • attach the provided double-sided tape to the speakers, secure within the tower, plug into appropriate ports
     
     
10. Secure Back Plate
    
    
11. Remove Protective Film on Mashgin Logo
    
    
12. Connect External Cabling
    • follow the External Cabling Guide to connect all cables appropriately

 

Ready to assemble the Side UX? See here for a step-by-step guide!

 

✋🏽 For any additional questions, please contact our support team at [e-mail]