How to Power Cycle the Glory CI-10

 

Steps to Power Cycle Glory Devices

1. Unlock both black façade doors on the Coin and Bill collectors using the blue key. 
2. Turn both of these power switches to the off (O) position.
3. Rack out the Bill collector completely using the red key.
4. Behind and under the Bill collector you'll find the FCC. 
5. Switch this to the off (O) position. The button is on the front left side of the silver box. 
6. Wait about 2-3 minutes.
7. Switch the FCC back to the on (I) position.
8. Rack in both Coin/Bill collectors.
9. Switch both the Coin and Bill power buttons back to the on (I) positions.
10. Allow the Glory 3-5 mins to boot back on.
    • If the Glory devices continue to stay in an errored state, please contact Glory Support at [phone]. Provide them with the collector's serial number, which can be found on a white sticker on the front or back of the device.

 

✋🏽 For any additional questions, please contact our support team at [e-mail]