This article covers the Adyen integration within Mashgin.
Summary
Adyen is a payment gateway that utilizes Verifone P400 card readers.
Checkout Flow
| Customer places item(s) on the base of the kiosk. | |
| Customer uses credit / debit card or tap to pay on the Verifone reader in order to complete transaction. |
Requirements
- Confirm with Mashgin Support that the payment credentials are in place.
- The required screw to mount the P400 female thread is an M3 x 0.5 thread pitch screw. We recommend a 10mm length to accommodate a flat and locking washer. No drilling required. If you are unsure of how to mount the reader, please reach out to Mashgin Support.
Installation
- Confirm with Mashgin Support you are on-site before plugging in the payment device.
-
Ensure you use a known good LAN cable and a functioning internet connection. Plug one end of the LAN cable into your network and the other end of the LAN cable into the hub ETH port.
-
Ensure that the AC Adapter is plugged in to a known good AC outlet. Plug the other end of the AC Adapter cable into the terminal’s HUB power cable connection.
- Connect the cable to the reader. Please be careful when plugging the pin connector to the back of the reader. Pins can get damaged if not placed properly.
- Please reach out to Mashgin Support at help@mashgin.com to configure and pair the reader itself.
Vendor Support Contact Information
- Help Center: help.adyen.com
Integration Request
To enable this integration, please reach out to sales@mashgin.com for more information!
✋🏽 For any additional questions, please contact our support team at help@mashgin.com